• 앰프 (Model BAS002)
  • 1) Compact, Lightweight Design
    2) 500W Output Power
    3) 5 Hz to 60 kHz bandwidth / THD + N < 0.12%
    4) Remote control / Arbitrary waveform using USB memory
    5) Pre-programmed pink and white noise
    6) Fast and easy-to-use
    7) Utilize the 831 noise generator for fully automated reverberation time measurement
    8) Fully compliant with Standards: ROHS, CE, ISO 140, ISO 3382, ASTM E90, ASTM E336, ASTM C426, ASTM E2235
  • 221B01 힘센서
  • Link ICP? quartz force sensor, 10 lb comp., 10 lb tension, 500 mV/lb

    Measurement Range: 10 lb (0.04448 kN)
    Sensitivity: (±15%) 500 mV/lb (112404 mV/kN)
    Low Frequency Response: (-5%) 0.01 Hz
    Upper Frequency Limit: 15000 Hz
    Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Linear Pattern - 500UW 스트레인 게이지
  • General-purpose gage. Exposed solder tab area 0.10 x 0.07 in [2.5 x 1.8 mm].
  • Hysteresis Dynamometer 모터 다이나모미터
  • Hyateresis Brake를 이용한 다이나모미터 시스템으로, 소형 전동기의 성능 시험에 적합.
    4W~14KW 전동기 시험에 적용가능하며, 관성이 적고 정밀도,재현성이 좋은 것이 특징.
    저속에서 고속까지 전영역에 대한 테스트가 가능.
  • 앰프일체형 소형 모달 가진기
  • 1) Integrated power amplifier eliminates the need for a separate, cumbersome power amplifier
    2) SmartShaker provides up to 7 pounds pk sine force with a 1/2 inch stroke
    3) 10-32 threaded mounting insert supports payloads up to 2 lbs
    4) Trunnion mounting base w/ EasyTurnTM handles
  • 청력측정기 보정기 (Audiomoter Calibration)
  • 1) Testing
    2) Earphones and hearing aid testing
    3) Electro testing
    4) Audiometer
  • 261A13 힘센서
  • PCB L&T Triax force link, charge, 10k lb max (Fz), 4k lb max (Fx,y), 15 pC/lb (z), 32 pC/lb (x,y)

    Temperature Range: -100 to +350 °F (-73 to +177 °C)
    Electrical Connector: 10-32 Coaxial Jack
  • Linear Pattern - 500BH 스트레인 게이지
  • Widely used general-purpose gage with compact geometry. See also 500BL and 500UW patterns.
  • Model 1550B Strain Indicator Calibrator
  • A true Wheatstone-bridge simulator, the 1550B Strain Indicator Calibrator presents known and repeatable resistance changes to the input of the indicator. Three decades of push buttons are used to produce incremental resistance changes. The 1550B is NIST-traceable.

  • 모달 가진기
  • 1) Through-hole armature with chuck and collet attachment provides simple setup with modal stingers
    2) Lightweight and portable weighing just 13 lbs (6 kg) with an approximately 5” (125 mm) square footprint
    3) Trunnion base provides flexibility when choosing best exciter location(s)
    4) 0.7” general purpose stroke and broad frequency range supply adequate input energy for most small to mid-sized modal test applications
    5) Forced air cooling sufficient to meet full shaker performance (25 lbfpk) specifications
   21  22  23  24  25  26  27  28  29  30